FAQ: best metal cutting circular saw

This is inadvisable. A standard circular saw will cut too quickly for metalwork so you really should consider a standalone saw designed expressly for working with metal to get the best results in a safe manner.

Abrasive discs are cheaper but they’ll wear down during use and they also create a great deal of sparks. Carbide-tipped cold-cutting blades last up to 20 times longer while remaining intact for the duration of their lifespan. There’s no degradation and you can expect clean, smooth cuts with no burrs and no sparks either.


You can if you closely follow the guide line or laser line.

You can use your metal cutting circular saw but you’d be well advised to swap out the blade for one designed to cut through wood rather than metal.

You should avoid abrasive discs and opt for carbide-tipped or CERMET-tipped cold-cutting blades.

Anywhere from 2700 RPM to 3900 RPM works well depending on the application.

Absolutely. Even if you’re not using abrasive discs, you’ll still run the risk of sparks and flying debris that could be lethal if it flies into your unprotected eyes. Don’t go without the goggles..

This depends entirely on personal preference and the scope of the projects you want to work with. The standard size is 7 ¼ inches and this is a solid, multi-purpose choice.

Yes, they are. If you’re looking to carry out sustained work in a commercial setting, you’ll end up burning a cheap saw out and it won’t do the job you need it to. For the home hobbyist, though, there’s no need to spend a fortune to get a reasonable metal cutting circular saw.

best metal cutting circular saw: Looking for more information?

Interested to learn more in-depth details about selecting the right tool for your needs? Read our Informational Buyer Guide and Frequently Asked Questions sections on this topic for more details.