FAQ: best wood milling machine

These machines have some characteristics in common. The motor and gear box in each machine drives a spindle that rotates and they each have a supportive table. With bona fide milling machines, though, you can cut on the sides not just at the tip like with a drill press. Milling cutters are able to make holes but they can also trim material and cut slots or grooves.

No!  If you do this, the clearance angle means the cutter will rub and create too much friction. In the worst scenario, the cutter might break completely.

These mills have tables you can adjust vertically. They sit on a saddle supported by a knee. This knee is a huge casting that rides on the column of the mill.

This is the angular distance between adjacent teeth on the cutter.

This is simply the angle on each tooth performing the actual cutting.

This has a cylindrical shaft which is tapered. The driving end has a standard milling taper while the other end has a threaded part that receives the arbor nut. You can place one or more cutters on the straight part.

A collet is a sleeve bushing to help you reduce the size of the hole in the spindle. This allows you to fit small shank tools into large spindle recesses.

This is a type of collet that has a standardized spindle end. You can get these in many sizes in order to take cutters that can’t be mounted on arbors.

Yes, it is. Look for quick-change adapters on the spindle nose of the milling machine. You’ll be able to use this to set up numerous operations such as end milling, drilling and boring without altering the set-up of the part you’re machining.

Chuck adapters allow you to fix chucks to any milling machines which have standard spindle ends.

best wood milling machine: Looking for more information?

Interested to learn more in-depth details about selecting the right tool for your needs? Read our Informational Buyer Guide and Frequently Asked Questions sections on this topic for more details.