We often come across situations where we face a dilemma about whether to use a jointer planner or benchtop jointer. Before taking a deep dig into the conversation, let’s understand that both of the tools are used to produce a flat surface along a board’s length. This duo are essential tools that have the same purposes, however, the difference lies in its usage type.
What is Jointer?
A jointer is basically a piece of machinery used to make the edge of the wooden board straight and square. A jointer’s main aim is to join the wooden board in order to create a much larger wooden board.
It is possible to extend the wooden board without using a jointer by moving a hand plane across the wood rather than moving the wood throughout the machine. This will take a lot of time and effort.
However, with the aid of a jointer, square edges are quickly made with little hassle.
Pros of Jointer
- With a jointer, you can easily make your wood square-shaped rather than by hand.
- It is the easiest way to twist and warp.
- Jointers are flexible enough so that you can easily change the angle of the cut as per your requirements.
Usages of Jointer Planner and Benchtop Jointer
Jointer Planner and Benchtop Jointer – both the tools are used to make surface faces and edges flat.
Top jointer planner is used for high-quality finishes, such as high-quality furniture or fine cabinet.
A jointer planner is used to flat the surface of the bowed piece of wood or twisted wood. A jointer planner will help you to get the superior finish.
What you should buy first? Jointer, Planner or both
If you are concerned about budget, a planner is the best option to buy first as it helps you to get the end result. However, it won’t give you a perfect finish as the benchtop jointer gives.
Before stepping into the discussion, which one to buy first. Let’s go through the following points:
- Regardless of whether you use jointer planner or benchtop jointer, the objective of both the tools is the same i.e to get board faces sharp and even surfaced and square.
- A jointer will flatten your board on one side, but it will not give the board the same thickness along its length. When you look at it from one side, you will get to know that the thickness will be different even if you only flatten it.
- A planner will make the board of the same thickness along with its length.
- To reduce the burden, you can buy a pre-flattened board so that the jointer will find it easy to flatten and square the surface.
- In case you don’t get time to buy pre-flattened wood, you can choose the board that looks flat and run it through the planner in order to get the right thickness.
If you are a professional who wants the perfect thickness and shape of a board, it is advisable to purchase both – jointer and planner as it will save you time.
How to use the Benchtop jointer and Planner Jointer
- Ensure that the jointer tool is level and the surfaces are flat and in its default position. Ensure the fences is 90 degree to the bed in its default position.
- Adjust the cutting edges with jointer nobs. Start at 1/32 of an inch, or for really twisted wood, go up to 1/16 of an inch. You have more safety margin for splinting of the wood at 1/32 of an inch.
- Ready your board with push blocks and start the jointer machine.
- Gently cut the wood with a jointer and push it with the help of push blocks for the last bit.
- Flip the flattened part of the wood, put it against the fence. Repeat the process with the edge of a wood.
Many people often get confused between benchtop jointer and planer jointer. They find it difficult to decide which one is better to buy. This is nothing like choosing one over another. The duo is used for the perfect shape and sharp edges. In case, if you use a jointer, you get consistent and parallel surfaces which are not possible with hands. Therefore, using a planner and a jointer is quite a good idea as these will help you get perfect square off edges.